Web Interface Configuration Guide — Doc. 9211A
HD-RX-4K-x10-C-E(-SW4) • 49
3. In the Cisco section, click the Select File button and then browse and select the
configuration file generated in the
Generating a Configuration File (on page 45)
section.
NOTE:
Login credentials for the Cisco device are encrypted and embedded in the
configuration file.
The configuration file loads and the HD-RX-4K-x10-C-E(-SW4) connects to the Cisco
device. When the connection is successful, the Connected status indicates Yes, and the
Cisco device model and firmware version are displayed as shown in the example below.
4. (Applicable only if login credentials for the Cisco device need to be updated) Do the
following:
a. Toggle the Override Configuration File switch to Yes.
b. Enter the new credentials in the Username and Password text boxes.
c. Press the Save/Connect button to reconnect to the Cisco device.