42 • HD-RX-4K-x10-C-E(-SW4)
Web Interface Configuration Guide — Doc. 9211A
1. Select the desired speed of data transmission (baud rate) from the Baud Rate drop-down
list. Available options are:
l
1200
l
1800
l
2400
l
3600
l
4800
l
7200
l
9600 (Default value)
l
14400
l
19200
l
28800
l
38400
l
57600
l
115200
NOTE: The baud rate setting of 115200 must be used for third-party control by
Cisco devices, which is configured under
Third-Party Control (on page 44)
on the
Device page.
2. Select the number of data bits (7 or 8) that will be used from the Data bits drop-down list.
3. Choose the error checking type from the Parity drop-down list. Available options are :
l
None (default)
l
Odd
l
Even
l
Mark
4. Select the number of stop bits (1 or 2) that will be used from the Stop bits drop-down list.
5. Choose the flow control mechanism (controls the flow of data between the devices) from
the Flow Control drop-down list.
Available options are:
l
None (default)
l
XON/XOFF (software handshake)
6. Click the Save button to save your modifications.
