Web Interface Configuration Guide — Doc. 9211A
HD-RX-4K-x10-C-E(-SW4) • 43
Cloud Settings
The Cloud Settings section of the Device page provides functionality to enable or disable the
cloud configuration service connection. By default, the cloud configuration service connection is
Enabled.
To disable the connection to the cloud server, move the Cloud Configuration Service Connection
slider to the Disabled position. To enable it again, move the slider to Enabled.
Control System
To connect the HD-RX-4K-x10-C-E(-SW4) to a control system, in the Control System section of
the page, do the following:
1. In the IP ID drop-down list, select the IP ID of the HD-RX-4K-x10-C-E(-SW4). Valid values
range from 03 to FE in hexadecimal notation.
2. In the IP Address/Host Name text field, enter the IP address or hostname of the control
system.
3. The Status field (read only) displays the connection status of the HD-RX-4K-x10-C-E(-
SW4) to the control system as OFFLINE or ONLINE.
4. To save the new entries, click Save Changes. The Control System Save message box
appears, indicating that the control system settings were saved successfully.
