Web Interface Configuration Guide — Doc. 9211A
HD-RX-4K-x10-C-E(-SW4) • 47
l
Switcher Input: Configure the input ports on the HD-RX-4K-x10-C-E(-SW4):
o
If the input port is HDMI In1 (default setting) or HDMI In2, click Save Button.
The button is added to the Source Buttons list.
o
If the input port is DMLite In3, DMLite In4, or DMLite In5 (HD-RX-4K-510-C-E
[-SW4]) only, configure the following parameters:
n
Transmitter Model: Select the desired Crestron DM Lite transmitter.
Available options are:
HDI-TX-301-C-2G-E
HD-TX-301-C-E
HD-TX-201-C-2G-E
HD-TX-101-C-E
HD-TXC-101-C-E
HD-TX-101-C-1G-E
HD-TXC-101-C-1G-E
n
Transmitter Input: The list of transmitter inputs varies depending on the
transmitter model that is selected. Select each input for which a button
is to be added to the Cisco Touch 10 screen, or select No Change to
make a route change to the DM Lite input without changing which input
on the DM Lite transmitter is to be routed. For each button, click Save
Button. Each button is added to the Source Buttons list as shown in the
following example.
