Web Interface Configuration Guide — Doc. 9211A
HD-RX-4K-x10-C-E(-SW4) • 3
Access Web Interface with Crestron
Toolbox Application
To access the web interface by opening a web browser within the Crestron Toolbox application,
do the following:
1. Open the Crestron Toolbox application.
2. From the Tools menu, select Device Discovery Tool. You can also access the Device
Discovery Tool by clicking the Device Discovery Tool button in the Crestron Toolbox
toolbar. The HD-RX-4K-x10-C-E(-SW4) is discovered and is listed in the device list on the
left side of the screen. The associated host name, IP address, and firmware version are
also displayed.
NOTE:
If there is security software running on the computer, a security alert might be
displayed when the Crestron Toolbox application attempts to connect to the network.
Make sure to allow the connection so that the Device Discovery Tool can be used.
3. In the Device Discovery Tool list, double-click the HD-RX-4K-x10-C-E(-SW4) device.
4. Enter your credentials in the Authentication dialog that opens, and then click Log In.
5. Click Web Configuration in the Configuration page displayed on the left side of the Device
Discovery Tool.
