16 • HD-RX-4K-x10-C-E(-SW4)
Web Interface Configuration Guide — Doc. 9211A
The selected EDID is automatically sent to all inputs and appears in the EDID drop-down list in
the Global Inputs section of the page.
Global Inputs
The Global Inputs section displays information and enables settings to be modified for available
local and transmitter inputs. DM Lite inputs are listed below the detected transmitter model
name.
The following information about the HDMI inputs and DM Lite inputs can be viewed and
configured in this section of the Inputs page.
l
Input Number (read-only): Indicates the input number. Input numbers of transmitter
inputs are shown in the format “X.Y”, where X is the input number of the corresponding
DM Lite input and Y is the transmitter input number.
l
Sync (read-only): Indicates whether a valid video signal is detected at the corresponding
input.
Yes indicates that a source is detected.
No indicates that a source is not detected.
l
Name: Displays the name of the local or transmitter input. To modify the name of the
input, enter the new name in this field.
l
EDID: Displays the selected pre-defined EDID file. To modify the existing setting, select an
EDID from the drop-down list.
l
HDCP Receiver Capability: Specifies whether HDCP Support for this input will be Disabled,
Auto, HDCP 1.4, or HDCP 2.2. To modify the existing setting, select the desired option from
the drop-down list.
NOTE:
VGA inputs and HD-TX(C)-101-C(-1G)-E transmitter HDMI inputs do not support
setting HDCP receiver capability. As a result, the HDCP Receiver Capability drop-down
box will not be displayed for those inputs.
