32 • HD-RX-4K-x10-C-E(-SW4)
Web Interface Configuration Guide — Doc. 9211A
Automatic Power Settings
Configure automatic power-off and power-on settings in the Automatic Power Settings section
of the Output page.
By default, automatic power-on and power-off settings are disabled. To enable automatic
power settings, move the Automatic Power slider to Enabled. To disable automatic power
settings again, move the Automatic Power slider to Disabled.
Configuring Power-Off Settings
To configure the automatic power-off settings, do the following in the Power Off section:
1. In the Output Timeout drop-down list, select the amount of time of signal inactivity before
the HDMI output automatically turns off. Valid values range from 5 Seconds (default
setting) to 90 Seconds. Alternatively, select Custom and enter the desired number of
seconds (valid values range from 1 to 500 seconds) in the corresponding text entry field.
2. Move the Turn Off Output slider to Yes to turn off the HDMI output or to No to enable the
output to remain turned on.
