38 • HD-RX-4K-x10-C-E(-SW4)
Web Interface Configuration Guide — Doc. 9211A
Network
To configure the network settings of the HD-RX-4K-x10-C-E(-SW4), modify one or more of the
following:
l
Host Name: Overwrite the existing host name in the Host Name field with the desired new
host name. The host name is restricted to the letters a to z (not case sensitive), the digits 1
to 9, and the hyphen.
l
Domain Name: Specify a domain name.
l
Primary Static DNS: Enter the IP address of the primary DNS server.
NOTE:
The Primary Static DNS field may not be editable while DHCP is enabled.
l
Secondary Static DNS: Enter the IP address of the secondary DNS server.
NOTE:
The Secondary Static DNS field may not be editable while DHCP is enabled.
l
DHCP: Set this slider to Enabled or Disabled to specify whether the IP address of the HD-
RX-4K-x10-C-E(-SW4) is to be assigned by a DHCP (Dynamic Host Configuration
Protocol) server.
o
When DHCP is Enabled (default setting), the IP address of the HD-RX-4K-x10-C-E(-
SW4) is automatically assigned by a DHCP server on the LAN for a predetermined
period of time.
o
When DHCP is Disabled, manually enter information in the following fields:
n
IP Address: Enter a unique IP address for the HD-RX-4K-x10-C-E(-SW4).
n
Subnet Mask: Enter the subnet mask that is set on the network.
n
Default Gateway: Enter the IP address that is to be used as the network’s
gateway.
To save new network entries, click Save. The HD-RX-4K-x10-C-E(-SW4) automatically reboots.