Web Interface Configuration Guide — Doc. 9211A
HD-RX-4K-x10-C-E(-SW4) • 35
1. Choose the interface to send a power-on command by selecting one of the following from
the Send Command drop-down list:
l
None: No command is sent. Continue with Step 6.
l
CEC (Consumer Electronics Control):When CEC command is chosen, select one of
the following options in the drop-down list displayed below the Send Command
drop-down list.
o
Power On: RCP (Remote Control Passthrough) and IVO (Image View On):
Continue with Step 3.
o
Power On: RCP Only: Continue with Step 3.
o
Power On: IVO Only: Continue with Step 3.
o
Custom: Continue with Step 2.
l
RS232: Continue with Step 2.