10 • HD-RX-4K-x10-C-E(-SW4)
Web Interface Configuration Guide — Doc. 9211A
For each DM Lite® input, the following data is reported:
l
DM Lite “Input Name" Transmitter: "Input Name" matches the input name defined on the
INPUTS page or the corresponding DM Lite input page. For example, the default name for
HD-RX-4K-x10-C-E(-SW4) Input 2 is "DM Lite 2", the name displayed is: "DM Lite 2
Transmitter".
If the input name was changed programmatically or through the INPUT page or the
corresponding DM Lite input page of the web interface, the name will get updated in real
time. For example, if the name is changed to "DML 2" the label will read: "DML 2
Transmitter".
l
Connected: Yes, if a DM Lite transmitter is connected or No, if DM Lite transmitter is not
detected
l
Model: Model of the connected DM Lite transmitter, for example, HD-TX-301-C-E. If a DM
Lite transmitter is not detected, no information is displayed.
l
Firmware version: Firmware version as reported from the connected DM Lite transmitter.
“N/A” will be displayed in case that the transmitter's firmware version is not available (for
HD-TX-101 transmitters). If a DM Lite transmitter is not detected, no information is
displayed.
l
Serial number: Serial number as reported from the connected DM Lite transmitter. “N/A”
will be displayed in case that the transmitter's serial number is not available (for HD-TX-
101 transmitters). If a DM Lite transmitter is not detected, no information is displayed.
