Web Interface Configuration Guide — Doc. 9211A
HD-RX-4K-x10-C-E(-SW4) • 45
Generating a Configuration File
To generate a configuration file:
1. Go to
https://configuration.crestron.com
The Crestron-Cisco Touch 10 Configuration page opens.
2. Under the Hardware Configuration tab, configure the following parameters:
l
Filename: Enter the desired name of the configuration file.
l
Crestron Hardware: Select HD-RX-4K-410-C-E, HD-RX-4K-410-C-E-SW4, HD-RX-
4K-510-C-E, or HD-RX-4K-510-C-E-SW4.
l
Cisco Hardware: Select the desired Cisco video conference system. Available options
are:
Webex Room Kit
Webex Room Kit Mini (default setting)
Webex Room Kit Plus
Webex Room Kit Pro
Webex Codec Plus
Webex Codec Pro
Webex Room 55 Single
Webex Room 55 Dual
Webex Room 70
Webex Room 70 G2
SX80 Codec
l
Communication: RS-232 is the only available selection.
l
Username: Enter the desired username to be used for authentication to connect to
the Cisco video conference system.
l
Crestron Output: HDMI is the only available selection.
