Covidien Nellcor OxiMax N-600x, Руководство оператора

Страница: 24 / 146

General Introduction
18
Operator’s Manual
Plethysmographic (Pleth) Display
Figure 9. Pleth Display View
Use this display view for visual monitoring information in waveform. The
plethysmographic (pleth) display includes a “wiper bar” plethysmographic
waveform, menu bar, and current measured SpO
2
and pulse rate, upper and lower
limit settings. It also includes a battery fuel gauge if running on battery power.
Plethysmographic waveforms with peak to peak amplitudes less than ten pulse
amplitude units (PAUs) are associated to one another. If enabled, SatSeconds and
SPD icons display. For more information, reference
Managing the View Display , page
33.
Blip Display
Figure 10. Blip Display View
Use this display view for visual monitoring information in blip bar form. The blip
display includes a pulse amplitude blip bar, current measured SpO
2
and pulse rate,
current upper and lower SpO
2
and pulse rate limits. It also includes a battery fuel
gauge if running on battery power. If enabled, SatSeconds and SPD icons display. For
more information, reference
Managing the View Display , page 33.
Real-Time Trend Display
Figure 11. Real-time Trend Display View
Use this display view for visual monitoring information related to real-time trends.
The trend data plots are automatically updated as the oximeter calculates each new
trend point, where the interval between calculations is based on the display time