Covidien Nellcor OxiMax N-600x, Руководство оператора

Страница: 109 / 146

Error Codes
Operator’s Manual
103
Error Codes
When the oximeter detects an error condition, it displays “EEE” followed by an error
code of up to three digits.
Figure 96. Error Condition Screen, Battery Failure
When an error code other than the ones listed in
Table 17 on page 107
appears, turn the
oximeter off and back on again. If the error code reappears, record it and notify
service personnel. When this occurs, the unit will stop monitoring, remove all
information from the screen and display the message “EEE XXX,” and sound a low
priority alarm. Cycling the power clears these errors.
Prompts and Error Messages
Occasionally, the menu area displays a prompt or error message. In most instances,
messages remain displayed for a set time. This depends on the criticality of the
message. High priority messages overwrite low priority messages. Messages of the
same priority display in order of occurrence. For multiple messages, lower priority
messages display when higher priority conditions clear. The highest priority is “1”
and the lowest is “3.” Messages remain on the screen until the condition clears if the
time-out setting is NONE. If the message has a maximum time to remain on the
screen, it will have a time-out setting.
Note:
Pressing the ALARM and/or ALARM SILENCE key(s) clears some messages. Pressing the
ALARM SILENCE key silences any audible tone and the second press clears the message.
1. Prompts —Prompts require a response. For example, the SAVE DEFAULTS? prompt
requires a user responsof YES or NO.
Figure 97. Save Defaults Prompt Screen