HomeVision® Pro
© Corroventa Avfuktning AB
2021.02
4 (44)
Manufacture directive
HomeVision® Pro has been electrical safety tested and EMC tested. HomeVision® is CE labelled.
Disclaimer
•
Incorrect installation and/or incorrect handling can cause property damage as well as injury.
•
The manufacturer assumes no liability for damage arising as a result of failing to follow these
instructions, not using the machine as intended. Such damage is not covered by the
warranty.
•
The warranty applies to damage to the machine caused by material or manufacturing
defects and does not cover consequential failure.
•
The warranty does not apply to consumables or to normal wear.
•
It is the responsibility of the purchaser to inspect the goods upon delivery and to ensure its
function according to the instructions in the manual during use.
•
Changes or modifications to the machine must not be performed without written
permission from Corroventa Avfuktning AB.
•
The product, technical data and/or installation and operating instructions are subject
to change without notice.
•
These user instructions contain information protected by copyright laws. No part of this
document may be reproduced, stored in an information storage system or transmitted in
any way or by any means without Corroventa AB's written consent.
Any comments regarding the content of this document must be sent to:
Corroventa
Avfuktning AB
Tel: +46 (0)3637 12 00
Mekanikervägen 3
SE-564 35 Bankeryd, Sweden
