HomeVision® Pro
© Corroventa Avfuktning AB
2021.02
25 (44)
Selecting language
In status view, normal view, press
<Setup>
to get to
Administration view where "Select Language" can be
found.
Press
<Select>
which marks the first row,
Date/Time. Scroll down to ”Select Language”
using
<
▼
>
.
Press
<OK>
.
Use
<
▲
>
or
<
▼
>
to select the desired language.
Press
<Save>
and the language has now been reset.
Service status
–
Reset service counter
In the status view, normal view, first press
<Setup>
and then <
▼
> to get to the Service/System view.
In the Service/System view press
<Select>
to mark
the first row Service Status. Press
<OK>
to select this
function.
The system now presents a list of the paired units
and, for each of these, how many days remain until
service is required.
After a service has been carried out and the counter
should be reset, select
<Modify>
at the Time until
service presentation.
Then select the unit to be reset and press
<OK>
.
To prevent unintentional resets, the system then
asks a confirmation question. If the intention was to
reset the counter for the selected unit, press
<OK>
.
Once the selection has been confirmed, a
confirmation is presented stating that saved changes
have been stored in the Control unit. If this
confirmation does not appear, the message has
not reached the unit. Repeat the procedure.
