HomeVision® Pro
© Corroventa Avfuktning AB
2021.02
23 (44)
Connecting a new unit
In the event of a new installation or other situation
where the control panel does not already have a
control unit connected, see chapter Installation of
control unit and connection of control panel.
NOTE!
If a new control unit is to be connected that replaces an
older/other control unit, ensure to remove the
previous unit from the system before connecting the
new one. In this way, the identity is made available to
the new unit, which is easier and better for users who
perhaps already know which unit number corresponds
to which machine.
In status view, normal view, press
<Setup>
to get to
the Administration view where "Connect new unit"
can be found.
Press
<Select>
which marks the first row, Date/Time.
Scroll down to ”Connect new unit”
using
<
▼
>
. Press
<OK>
.
For normal installation, then select the option
Standard, which means that the units automatically
re-establish the connection after a power cut.
After selecting pairing type, for the Standard option,
information is presented stating that the Control unit
is only open to pairing for two minutes after start. For
the service option, a warning is instead presented
stating that the pairing is not permanent. Press
<Continue>
.
The control panel now searches for available units.
Wait until this process is complete, which normally
takes 30 to 40 seconds. If it takes longer, restart the
Control unit and try again.
When the search is complete a list of available
units appears. Control units that are already
connected to the control panel are not in this
list. There is usually just one control unit in the
list but, if multiple control units within range
have just been started, the list may be longer.
Select the desired unit, if necessary, by
comparing presented identities with the serial
number on the back of the control unit, and
then press
<OK>
.
When the unit has been selected, the system tries to
connect, exchange relevant information to establish
contact. Wait until this process is complete whereupon
