CorroVenta HomeVision Pro Скачать руководство пользователя страница 38

Страница: 38 / 46

HomeVision® Pro

2021.02

37 (44)

Resetting to factory default

In the status view, normal view, first press

<Setup>

and then <

▼

> twice to get to the Settings view.

In the settings view, press

<Select>

and then

▼

> so that the ”Reset all settings” row is marked.

Press

<OK>

to select this function.

The panel now asks the user to select the unit to be
reset. If required, press <

▼

> to scroll to the relevant

unit. If the relevant unit is already marked, press

<OK>

to continue.

To prevent any unintentional changes, the user
confirms the selection and intention once more.
Press

<OK>

if everything is OK.

Factory configuration means:

For dehumidifiers

that the unit uses fixed regulation

method with the setpoint 65% and hyst/- 4%.
The alarm level is set to +10%, which means that the
alarm for high humidity is presented if the relative
humidity in the space is 79%.

For VentoV

ind™

Start level 1.1

If in doubt whether the change was saved or not, use

the function ”See configuration overview” to check

which settings are now applicable to the unit.

Содержание HomeVision Pro















































Результаты поиска

Содержание HomeVision Pro

Отзывы:

Похожие инструкции для HomeVision Pro

Бренды по названию

Популярные бренды

CorroVenta HomeVision Pro, Руководство пользователя

Результаты поиска

Содержание HomeVision Pro

Отзывы:

Похожие инструкции для HomeVision Pro

Бренды по названию

Популярные бренды