- 9 -
FLEX 200
3 SAFETY
3.1 Safety warnings and unauthorized use
COMPULSORY
•
Read the user’s manual carefully before carrying out any operation on the machine.
•
The machine must be used only for its intended purpose.
•
Pay close attention to the signs on the machine.
•
When prescribed, wear personal protective equipment.
•
Only qualified and appropriately trained personnel (MAINTENANCE TECHNICIAN) are authorized to access the
machine parts protected by panels for extraordinary maintenance and repair interventions.
•
Any routine maintenance intervention performed by the operator must be carried out with the machine off and the
power supply cable disconnected from the mains socket outlet.
•
The machine must be used by
a single operator
. Unauthorized people who could reach or touch machine parts
during operation must not be admitted in the nearby area.
•
The machine must be used by an operator who has attained the age of majority and is in suitable psychophysical
conditions defined by an occupational physician.
•
The substances that may be used on the machine -- such as colorants, paints, solvents, lubricants and cleansers --
may be hazardous to your health; handle, store and dispose of these substances in keeping with current regulations
and the instructions provided with the product.
PROHIBITED
•
The machine must not be used with cans exceeding the limits set forth in chapter 2.3 (Usable cans) and with colorants
other than those specified in the technical data table.
•
THE MACHINE MUST NOT BE USED IN AREAS AT RISK FOR EXPLOSION.
•
Do not pour highly flammable liquids in the machine; in case of use of colorants containing volatile solvents,
follow specific indications of chapter 3.5 “Requirements of the installation site”.
•
Avoid naked flames or material that may create sparks and cause a fire.
•
It is forbidden to smoke in the machine nearby area.
•
The machine must not be employed for food use.
•
The OPERATOR must not carry out operations reserved to the MAINTENANCE TECHNICIAN or the INSTALLATION
TECHNICIAN. The manufacturer CANNOT BE HELD RESPONSIBLE for damages deriving from the non-observance of
this prohibition.
•
It is strictly forbidden to use the machine without protections or with any safety devices present on the machine
disabled, broken down, or removed. The panels must be kept closed at all times.
•
Do not rotate turntable manually when dispenser is switched on. This may cause personal injury or damage to the
machine.
•
Do not stare the light source of the Laser Bung Hole Locator (Class II laser product).
•
If the machine catches fire,
never use water
. Use only dry powder or carbon dioxide fire extinguishers, and strictly
follow the instructions and warnings indicated by the manufacturer and listed on the extinguisher.
ELECTRICAL DANGER
•
ALWAYS PLUG THE MACHINE INTO A SOCKET THAT ENSURES PROPER GROUNDING.
The line must be protected
from overloads, short-circuits and direct contacts according to current accident prevention regulations. Incorrect
grounding may lead to the risk of electrical shock.
•
The machine must not be powered by a power source having specifications other than those listed on the identification
plate.
•
In the event of a sudden power outage, when power returns the machine will automatically be switched on to allow
the automatic processes to prevent products from drying out.
