- 30 -
FLEX 200
8
TECHNICAL SPECIFICATIONS
8.1
Technical data
Power supply
Single-phase 100 - 240 V~ ± 10%
Frequency
50/60 Hz
Fuses
(a)
T 2.5 A
Max. Power absorbed
(a)
60 W
Noise level
(b)
Level of equivalent acoustic pressure: < 70 dB (A)
Environment working
conditions
(c)
Temperature: between 10°C (50°F) and 40°C (104°F)
Relative humidity: between 5% and 85%, without condensation
Vibrations
The machine does not transmit vibrations to the floor that may compromise the stability and
precision of any nearby equipment.
Canister capacity
2.5 liters (2.64 q)
Number of canisters
16
Dispensing technology
Piston pump
Circuit flow rate
0.2 l/min
Dispensing system
Sequential
Type of valves
Ceramic valves
Type of colorants
Decorative: water, universal
(d)
Machine
110 kg (242.5 lb)
Packed
machine
134 kg (295.42 lb)
(a) The power information is purely indicative and depends strictly on the machine configuration.
(b) Value measured in laboratory and documented by the corresponding test report available at the manufacturers. Operating conditions: machine
normal working cycle, under simulated load conditions.
(c) The environment working conditions are strictly related to the type of colorants used (ask for information from the paint manufacturer). The
data shown are valid for the machine only.
(d) Data refer to the machine with empty canisters and without accessories.
