Model: 540491
Reverse Osmosis Tank Add-on Kit
Installation, Operation & Maintenance Guide
www.aquaticlife.com
1
Thank you for purchasing an Aquatic Life Reverse Osmosis Tank Add-on Kit.
When maintained properly, this unit will provide you with years of quality filtered water.
OVERVIEW
Reverse Osmosis (RO) water is a process of removing
contaminants from tap water using a special semipermeable
membrane.
The process works quite slowly, so it is often desired to collect
the water in a storage tank so that the water is available on
demand when needed.
This Kit includes everything needed to add drinking water to
most existing RO Filtration Units.
WARNING:
Please read carefully before proceeding with
installation. Your failure to follow any attached instructions and
operating parameters may lead to the product’s failure.
Contents (Model #540491)
1
Under Sink Water Line Adapter Valve
(½” Female x ½” Male x ¼” Press Fit)
1
Polishing Carbon Cartridge
1
Pressure Sensitive Solenoid
2
Carbon Cartridge Clips
1
Chrome Faucet
2
¼” MPT x ¼” Press Fit Adapters
1
In-line Check Valve
1
Set Mounting Screws
1
Drain Saddle
1
Roll Plumbers Tape
2
¼” Press-Fit Tees
1
Yellow Tubing ¼” x 4 Ft
1
Pressure Tank Valve
1
Blue Tubing ¼” x 4 Ft
1
Water Storage Tank
1
Installation, Operation and
Maintenance Guide
1
¼” Manual On/Off Valve
Tools & Materials Recommended for Installation
1 ¼” Adjustable Wrench
Electric Drill
7/16” Open End Wrench
Masking Tape & Pencil
1/8”, 1/4”, 1/2” Drill Bits for metal
(for faucet hole and drain hole)
Flashlight
Phillips Screwdriver
SCAN CODE TO VIEW
INSTALLATION VIDEO
