- 14 -
FLEX 200
4
SHIPPING AND HANDLING
4.1
General warnings
Personnel in charge of these operations must wear the following personal protective
equipment.
DANGER
To avoid personal injuries and property damage, use the utmost care and caution when handling the machine, and
carefully follow the instructions given in this chapter.
WARNING
The packing must be handled only by qualified personnel using appropriate handling equipment. Do not stack items
on the packing.
If the machine is installed near a wall, keep it at least 10 cm (4”) away to prevent the cables from being crushed.
4.2
Unpacking and placement
1x13-14 mm
1x8 mm
1x5 mm
To remove the screws that secure the machine to the pallet.
To remove the turntable lock hardware.
DANGER
The following procedure must be carried out by at least 2 people.
Store the packing material for future use, or dispose of it according to current regulations. In any case, we recommend
that you keep it for the entire duration of the machine warranty.
Make sure the packing has not suffered any damage or tampering during shipping; if so, contact the authorized
technical service or your dealer.
1. Cut the straps wrapped around the packing.
2. Remove the covering from the pallet.
3. Remove machine wrapping. Take out any accessories and/or material supplied with the machine.
DANGER
Should the machine appear damaged during shipping, do not attempt to start it and contact the authorized technical
service or dealer.
2
3
1