- 11 -
FLEX 200
3.3 Residual risks
Risk
Preventive measure
P.P.E.
Re. in the
manual
Risk of electrocution
- Risk of electrical shock
if you power the machine from a socket not
equipped with ground connection.
Power the machine through a grounded
socket outlet.
It is recommended to earth the machine
body.
\
ch. 5
Risk of electrocution
- Risk of electrical
shock if you access machine parts protected
by panels without first cutting off electrical
power.
The operator is not authorized to access the
machine parts protected by panels.
For the maintenance technician: before
performing any maintenance intervention,
shut off the machine and disconnect the
power supply cable from the mains socket
outlet.
\
Dorsal/lumbar injuries
- Handling heavy
loads when moving the machine and loading
cans on the shelf may cause injuries.
Do not exceed the weight limits stated by the
current regulations in force (20 kg for women,
25 kg for men).
If necessary, use appropriate lifting
equipment.
ch. 4 - 6
Risk of crushing / entanglement / dragging
-
During machine operation, the rotation of
the turntable takes place automatically.
The machine must be used by a single operator.
Unauthorized people who could reach or
touch machine parts during operation must
not be admitted in the nearby area.
ch. 6
Risk of falling objects / crushing
- When
positioning a can on the shelf, there is a risk it
may fall onto the operator.
Position the can so that the whole base rests
on the shelf surface.
ch. 6
Risk of crushing / impact
- Placing an
excessive load on the shelf or on the monitor
support arm (optional) may cause the
machine to loose stability.
Do not exceed the maximum load allowed.
On the shelf: 35 kg (77 lb)
ch. 6
Risk of crushing / entanglement
- During
colorant refilling operations, the stirrer inside
the canister may automatically start rotating.
Before performing any intervention, press
the off-line button.
\
ch. 6.4
Risk of slipping / falling
- Misuse of the shelf
may cause injuries.
Do not climb onto the shelf and/or sit on it.
Do not use the shelf as a ladder.
ch. 6.2.1
Risk of burning
- Setting too high time and
frequency stirring values causes the canister
stirring motors to get overheated.
Set a stirring time lower than 30 minutes and
the interval between one stirring process and
another equal to or higher than the stirring
time.
ch. 6.3
Risk of poisoning and sensitization
- Fumes
generated by the colorants used may cause
poisoning and/or sensitization during canister
refilling operations, machine cleaning and
disposal.
Read the warnings reported in the Material
Safety Data Sheets of the colorants used.
The MSDS must be provided by the colorant
manufacturer.
Keep the room suitably ventilated.
Personal
Protective
Equipment
as specified
in MSDS.
ch. 3.2 - 4
- 6 - 7