- 26 -
FLEX 200
WARNING
In case of improper actions, which caused canister overfilling with colorant:
•
In case the colorant has poured inside the machine, do not try to clean; turn the machine off at once and contact
an authorized service center.
•
If, on the contrary, the product has already poured out of the canister, it is necessary to shut off the machine
immediately and clean with paper or a moistened cloth. Whenever possible, leave the colorant to dry itself and
remove with a spatula.
•
If the product has not yet come out of the canister borders, it is necessary to avoid closing the canister with its lid
and provide immediately to dispense the exceeding colorant until the correct level is reached. Clean carefully the
upper border of the canister with paper or a moistened cloth before closing it with the lid.
NEVER USE WATER OR SOLVENT-BASED CLEANING PRODUCTS TO CLEAN THE MACHINE.
USING AGGRESSIVE CLEANING LIQUIDS CAN DAMAGE COMPONENTS AND EXTERNAL PANELS PAINT COATING.
DANGER
When using colorants containing volatile solvents the canister top up must be carried out opening one canister at the
time.
Avoid naked flames or material that may create sparks and cause a fire
WARNING
Failure to update the colorant levels in the canisters may compromise the accuracy of the hue produced or, worse yet,
lead to emptying the machine canisters and circuits.
We recommend that you keep the canisters full at all times by topping up frequently.
After topping up the colorant, it is advisable to carry out the stirring process using the functions provided in the
management software, to eliminate any air that may be emulsified and incorporated into the colorant.
Here below you will find a reference diagram to perform canister filling.
MAX
2.5 l
2.6 qt
1.8 l
1.9 qt
2 l
2.1 qt
1.2 l
1.3 qt
0.5 l
0.5 qt