- 18 -
FLEX 200
5 START-UP
5.1 General warnings
Personnel in charge of these operations must wear the following personal protective
equipment.
DANGER
THIS EQUIPMENT MUST BE GROUNDED. Check the grounding of the power supply system before connecting the
machine.
Do not use extension cords to power the machine.
The computer and any other devices connected to the machine via a serial line or connected to the computer itself
must be powered by an equipotential power supply network.
Do not use multisockets to connect other equipment to the same socket that powers the machine.
WARNING
Do not attempt to power the machine from a source having specifications other than those listed on the identification
plate.
The machine is isolated from the power supply line when the power plug is disconnected; it must therefore be installed
near an easily accessible mains socket outlet.
The power supply of the equipment connected to the machine via serial port, like the computer, must be equipotential
(which has a single access point to earth) because potential differences cause interferences and/or damage to the
serial ports.
5.2 Management computer
The dispenser is managed by the computer. The manufacturer can also supply a wide range of software applications to
manage all of the machine’s functions.
If the machine is supplied with the option COROB Connect, it will be possible to drive it through the use of an Android
or Windows Tablet device, with its corresponding dispensing software.
The complete installation of the machine, including computer connection, management software installation and
system configuration, must be carried out by a specialized maintenance technician.
