QUICK GUIDE
At the beginning of the working day
•
Check that the dispensing circuits and the machine in general are clean.
•
Check all valves are in closed condition as identified by the sticker.
•
Check the conditions of the cleaning brush unit; if necessary, clean and fill the brush container using only appropriate
liquid (the choice of the liquid depends on the nature of the colorants, and must be done directly by the manufacture of
the products used).
•
Carry out system Initialization and Purge.
Things to remember
•
Never let the machine in the OFF position.
•
In the canisters, stirring of each colorant takes place automatically (stirring times can however be customized).
•
Be careful not to fill the canisters with too much colorant. In case of overfilling, act as indicated in the user’s manual.
•
The colorant to be poured inside the canisters must be stirred manually. Do not use automatic shakers.
•
Close the canisters with their lids immediately after filling operations.
•
Remember to update accordingly the canisters filling levels via the management software.
At the end of the working day
•
Refill the canisters.
•
Update the canister filling levels in the management software.
•
Shut down the computer. Do not shut off the machine.
It is recommended to carefully read the user’s manual.
FLEX 200
