- 29 -
FLEX 200
3. Connect power supply and switch on the machine (chapter 5.4).
See the manufacturer manual for instructions on cleaning the computer.
7.5 Refilling the liquid of the cleaning brush
The quantity of cleaning liquid used depends on the frequency of usage of the machine and the type of liquid chosen.
WARNING
Only use cleaning fluids that have been recommended by the colorant manufacturer.
When the cleaning liquid in the brush container reaches the minimum level, fill up immediately.
1. Disconnect power supply (chapter 5.7).
2. Turn the knob horizontal position and remove the cleaning brush unit from machine.
3. Remove the brush and clean it. Replace if necessary.
4. Remove the top cover of cleaning unit, wash the brush and container and fill it with cleaning liquid.
5. Reassemble the brush and place back the unit in the machine, turn the knob vertical position making sure to insert
it firmly.
6. Connect power supply and switch on the machine (chapter 5.4).
B
A
MAX
XAM
