Cooper Wheelock SAFEPATH 4 SP4-TZC, Инструкция по установке, испытаниям, эксплуатации и техническому обслуживанию

Страница: 27 / 51

27
Enter the number of SP4-APS splitters used. The maximum number of splitters is 17.
NOTE : When the splitters are set to CLASS “A” the maximum number of Individual Zones is two per
splitter with a maximum of 34 per system. When the splitters are set to CLASS “B” the maximum
number of Individual Zones is four per splitter with a maximum number of 68 per system.
Remember, all SP4-APS splitter “
Audio Class of wiring ” settings must be the same.
Choose from the following Zone Paging pull-down menu selections (Enabled or Disabled).
NOTE: If Zone Paging is Disabled, the paging system will default to All-Call telephone paging. All
Individual Zone, Fixed Zone Group, and Logical Zone Group paging will be disabled. Also, all
Logical Zone Group programming will be disabled on the main screen.
Click the “ Next ” command button. The following “ Background Music Setup” screen will
appear:
Notice that 12 of the boxes are white. This represents active zones. This would be correct when
the “
Audio Class of wiring ” was set to CLASS “B” and the “ Number of Splitters ” was set to 3.
NOTE:
When the “ Clear All ” command button is selected, all check marks are removed from the
zone boxes. When the “ Set All ” command button is selected, all zone boxes will contain a
check mark.
Edit the “ Background Music Setup” to play on the desired Individual Zones. The check mark
indicates that the Background Music will play on the indicated Individual Zone.
STEP 7
STEP 8
STEP 9
STEP 10