Figure 45: Configuring e-mail notification
1. Select one of the 8 messages in the top button bar.
2. Enter a name.
3. Enter the e-mail address of the recipient in the "Recipient" field. If the message is
to be sent to multiple recipients (max.10), separate the e-mail addresses using a
semicolon.
4. Enter the reference in the "Subject" field (e.g. alarm).
5. Enter the message in the ”Text” box (e.g. burglary at xxx., address: xxxx etc.).
6. You can attach images recorded by each camera to the e-mail. For this purpose,
activate the checkbox next to the desired cameras.
7. You can attach images stored in the frame buffers to the e-mail. For this purpose,
activate the checkbox next to the desired frame buffers.
If you append images from several frame buffers, the e-mail may become
very large. In this case, it may not reach the recipient at all.
8. To attach data from a connected weather station, activate the corresponding
check box.
9. Specify the connection that is to be used to send this e-mail.
10. Enter an alternative connection that is to be used if the first one fails.
11. Repeat steps 1 to 10 for other e-mails, if desired.
12. Save the data.
- 68 -
Convision V600 A Series
