9.3.3 Time Control – Time-Dependent Actions
In this menu you can configure up to eight different points in time (timers 1 – 8) at
which the Convision V6xx A is to perform actions. Points in time trigger periodical
actions (e.g. every 10 minutes) within defined time periods (e.g. daily between 8 a.m.
and 4 p.m.).
Figure 37: Configuring the points in time – assigning actions
1. Select a timer and enter a name for it.
2. Click on a timer (timers 1 to 8) in the first table column. A page with a weekly
schedule is displayed.
Figure 38: Configuring the points in time – weekly schedule
3. Define how often this timer is to be activated, e.g. how often an e-mail is to be
sent or an output is to be switched. You can select "Seconds", "Minutes" or
"Hours".
4. Now define one or two time periods for each day of the week on which this timer
is to be active. Enter start and stop times for the respective days of the week.
5. Save the data.
Manual
- 59 -
