9.3.6 Camera
used
If a camera has been accessed, an action can be performed. It can be that a camera
is being viewed by a user via the Browser, or is being used to record to the frame
buffer/ hard disk. “Output Start-Stop” should be initiated as the action. A possible
application would be to optically check whether surveillance is being carried out.
The viewing of the cameras on a monitor (Video Loop) does not affect
“Cameras Used.”
9.3.7 HD Level (Convision V610 A only)
For all 8 possible partitions you can specify a hard disk level. If this level is reached,
one or more actions can be performed. This function is for long time and event
partitions without continuous recording.
9.3.8 Activity
Detection
Camera 6 can act as an activity detector. Via this menu you can assign actions to the
cameras to be performed when an activity message is received.
Figure 41: Configuring the activity detection
1. Enter a name.
2. Click "Activity Cam 6" in the first table column to display the next configuration
page.
- 62 -
Convision V600 A Series
