Figure 40: Configuring the periods – weekly schedule
3. Now define one or two time periods for each day of the week on which this timer
is to be active. Enter start and stop times for the respective days of the week.
4. Save the data.
5. Return to the page, on which you can select the periods.
6. Click "Add" to select actions that are to be performed in the selected periods.
7. A page will be displayed on which you can assign the event actions from various
groups.
8. You can assign any number of actions. All the actions assigned will be listed in
the table in the line associated with the respective period.
9. Repeat steps 1 to 8 for other periods, if desired.
10. Save the data.
11. Click "Delete" to cancel the assignment of actions.
)
Note: All the actions you want to trigger must first be configured. Clicking on the
actions opens the associated configuration pages. Check the status on these pages
to avoid assigning partitions that do not exist or messages that have not been written.
9.3.5 Live Video Loss
You can set actions to be carried out for each camera in case the video signal is lost.
If the video signal from a camera is lost, then one or more actions can be performed.
The missing video signal is only recognised when the camera is activated,
e.g. when recording to the hard disk or frame buffer or being viewed in the
browser.
Manual
- 61 -