Conair Carousel Plus D Series, Руководство пользователя

Страница: 98 / 208

5 - 2 l M a i n t e n a n c e
P r e v e n t a t i v e M a i n t e n a n c e C h e c k l i s t
Routine maintenance will ensure optimum operation and performance of the D Series
Carousel Plus Dryer. We recommend the following maintenance schedule and tasks.
• W h e n e v e r y o u c h a n g e m a t e r i a l s
r
Drain and clean the hopper. See Maintenance section entitled,
Cleaning the Hopper.
• W e e k l y, o r a s o f t e n a s n e e d e d
r
Clean or replace the process and regeneration filters.
You may need to clean filters more often than weekly. Frequency depends on how
much material you process and how dusty or full of fines it is
See Maintenance sections entitled, Cleaning the Process Filter and
Cleaning the Regeneration Filter.
r
Inspect hoses and hose connections.
Check for damage, kinks, or loose hose clamps. Replace any hoses that
show signs of damage or wear. Reposition and tighten loose hose clamps.
See Maintenance section entitled, Inspecting Hoses and Gaskets.
r
If equipped - Open volatile drain valve to remove volatiles and residue that
may have accumulated.
Place a bucket or pail below the drain for the volatiles to
drain into. Depending on your application, draining may need to be done more or
less frequently.
See Maintenance section entitled, Draining Volatiles.
• M o n t h l y
r
Clean the aftercooler and/or optional precooler coils and
the volatile trap.
You may need to clean the coils more often than
monthly. Frequency will depend on the type and volume of material you
process.
See Maintenance sections entitled, Cleaning the Aftercooler Coils,
Cleaning the Precooler Coils and Cleaning the Volatile Trap.
• E v e r y s i x m o n t h s
r
Inspect gaskets for damage or wear.
Damaged gaskets can allow moisture to seep into the closed-loop drying
system. Replace any gasket that is torn or cracked.
See Maintenance
section entitled, Inspecting Hoses and Gaskets.
(continued)