Conair Carousel Plus D Series, Руководство пользователя

Страница: 66 / 208

4 - 2 6 l O p e r a t i o n
(continued)
C o n t r o l F u n c t i o n D e s c r i p t i o n s - R W
C o n f i g u r a t i o n
( c o n t i n u e d )
Alarm Setup Screen with more options installed
To access the Alarm Setup screen:
1
Press the Navigation button
from the Home screen.
2
Press the Set-up (wrench) button
to get to the Dryer Set-up screen.
3
Press the Alarm Set-up Screen button
.
4
Enter the desired setpoint and delay (if applicable) for each alarm.
When conveying is installed, the Setup screen provides the
user with the ability to enter the number of load cycles that
will cause an alarm, if the demand is not satisfied in that
number of cycles.
When drying monitor is installed, low and
high temperature alarms is visible and can be
set at the same or different points in the dry-
ing hopper.
When continuous level is installed, the Hopper low level alarm setpoint is visible and the
low alarm level can be entered.
NOTE: Proper login is required to modify alarm settings. Depending on
your dryer configuration, your alarm choices and screen configurations
may vary from what is shown in this User Guide.
0
IMPORTANT: Factory
default alarm setpoints
should not be changed
without first consulting
with Conair.
Conair’s Instant Access
24/7 Parts and Service
number is
800-458-1960.
Outside the U.S., dial
814-437-6861.