Conair Carousel Plus D Series, Руководство пользователя

Страница: 35 / 208

I n s t a l l a t i o n l 3 - 1 5
3
Installa
tion
C h e c k i n g f o r P r o p e r A i r F l o w
IMPORTANT: This procedure must be performed before loading material into the hopper.
CAUTION: If the airflow direction is incorrect due to improper phase connection, material from
the hopper can be pulled back into the dryer, causing permanent damage to this equipment.
1
Turn on the main power to the dryer.
Make sure the dryer’s disconnect dial is in the ON
position. This powers up the control and the display will illuminate.
-
2
From the Home Screen , press the “Navigation” button.
3
Press the Set-up button (wrench) .
4
Press Right Arrow button.
(continued)
OFF
O
ON
I
WARNING: All wiring, disconnects, and fuses should be installed by qualified electrical technicians in
accordance with electrical codes in your region. Always maintain a safe ground. Do not operate the
equipment at power levels other than what is specified on the machine serial tag and data plate.
NOTE: Users must be
logged in as Maint 1 (user
level 3) in order to per-
form this operational test.
0
NOTE: Must be no alarms, and in Standby mode.
0