Conair Carousel Plus D Series, Руководство пользователя

Страница: 109 / 208

M a i n t e n a n c e l 5 - 1 3
C l e a n i n g t h e V o l a t i l e Tr a p o n t h e
D e m i s t e r
( D 6 0 0 - 1 0 0 0 )
1
Stop the dryer and lockout the main power.
2
Remove the thumbscrews then remove the volatile demister cover.
3
Remove the demister by pulling it out from the housing.
4
Clean the assembly using a mild soap and water. Let the assembly dry
thoroughly before installation.
NOTE: In cases of heavy volatiles, steam cleaning, pressure washing or the use of solvents, such
as acetone, may be necessary. Be sure to test a small area with the solvent you have selected to
be sure there is no adverse reaction.
5
Insert the demister carefully back into the housing, making sure to
completely push it towards the back of its housing.
6
Inspect the condition of the gasket. If it is damaged, replace the gasket.
7
Secure the cover in place using the original thumbscrews.
0
NOTE: Depending on the
build date and configura-
tion of your dryer, your
demister may be on the
right side of the after-
cooler. Removal and
cleaning procedures are
the same.
0
OFF
O
ON
I
5
Maintenance