Comtech EF Data SDM-9000, Инструкция по установке и эксплуатации

Страница: 244 / 256

Remote Control Operation SDM-9000 Satellite Modem
B–26 Rev. 4
Bulk Consol.
Status
(continued)
Paramete
r
Number
Parameter Name
(Command Reference)
Description
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
Backward Alarm enable RX2
(ref. 'BW_RX2_' command).
Backward Alarm enable RX3
(ref. 'BW_RX3_' command).
Backward Alarm enable RX4
(ref. 'BW_RX4_' command).
Scrambler type
(ref. 'SCRT_' command).
Descrambler type
(ref. 'DSCT_' command).
Interface RX 6321 frame structure
(ref. 'IRFS_' command)
Interface RX 8448 frame structure
(ref. 'IRFS_' command).
Interface RX 32064 frame
structure
(ref. 'IRFS_' command).
Interface RX 34368 frame
structure
(ref. 'IRFS_' command).
Interface 44736 frame structure
(ref. 'IRFS_' command).
Interface 51840 frame structure
(ref. 'IRFS_' command).
Modem operation mode
(ref. 'MOM_' command).
MODEM REMOTE/LOCAL mode.
System modem type
(ref. 'SMT_' command).
Sweep width range
(ref. 'SWR_' command).
p56 = n, where 'n' is '0' (OFF) or '1' (ON).
p57 = n, where 'n' is '0' (OFF) or '1' (ON).
p58 = n, where 'n' is '0' (OFF) or '1' (ON
p59 = n, where 'n' is '0' (V.35), '1' (EFD), or '2' (IDR).
p60 = n, where 'n' is '0' (V.35), '1' (EFD), or '2' (IDR).
p61 = n, where 'n' is '0' (NONE), '1' (G704), '3' (G743), or
'5' (G747).
p62 = n, where 'n' is '0' (NONE), '1' (G704), '2' (G742), or
'4' (G745).
p63 = n, where n is '0' (NONE) or '7' (G752).
p64 = n, where n is '0' (NONE), '6' (G751), or '8' (G753).
p65 = n, where n is '0' (NONE) or '7' (G752).
p66 = n, where n is '0' (NONE) or '9' (STS1).
p67 = n, where n is '1' (TX_ONLY), '2' (RX_ONLY) or
'3' (DUPLEX).
p68 = n, where n is '0' (LOCAL) or '1' (REMOTE).
p69 = n, where n is '0' (INTELSAT), '1' (DBS), or '2' (N5500).
P70 = nnnnnn, sweep range in Hz.