Comtech EF Data DT-4500 Series, Инструкция по установке и эксплуатации

Страница: 103 / 206

DT-4500 Series C- and Ku-Band Down Converters MN/DT4500.IOM
Front Panel Operation Revision 2
6–11
Finally, set the asynchronous character format. Use the   keys to select the
parameter, and then use the  keys to select the format. The available
choices (i.e., number of data bits; odd, even, or no parity; number of stop bits) are
8-N-1 , 7-E-2 , or 7-O-2 . Press ENTER .
6.2.3.2.3 (REMOTE:) ETHERNET
The DT-4500 Series C- and Ku-Band Down Converters, as initially
released, do not feature a rear panel ‘Ethernet’ port. Only current
production units offer Ethernet Interface operation. See Chapter 4.
FRONT AND REAR PANEL CONNECTORS for more information.
ADDRESS GATEWAY SNMP
MAC = 00-06-B0-00-00-0F
On the top line, use the
 
keys to select ADDRESS , GATEWAY , or SNMP . The
bottom line displays the
read-only
unit MAC address. Press ENTER .
6.2.3.2.3.1 (REMOTE:) ETHERNET

ADDRESS
IP Address/Range:
192.168.001.002/24
Edit the Management IP Address and Range for the rear panel ‘Ethernet’
100BaseTX port. Use the
 
keys to select a digit, and then use the

keys
to change that digit. Press ENTER .
6.2.3.2.3.2 (REMOTE:) ETHERNET

GATEWAY
Ethernet IP Gateway:
192.168.001.002
Edit the IP Gateway Address for the rear panel ‘Ethernet’ 100BaseTX port. Use
the   keys to select a digit, and then use the  keys to change that digit.
Press ENTER .