Comtech EF Data DT-4500 Series, Инструкция по установке и эксплуатации

Страница: 136 / 206

DT-4500 Series C- and Ku-Band Down Converters MN/DT4500.IOM
Ethernet Interface Operation Revision 2
7–16
7.5.2.2 Admin | SNMP
Sect
.
7
.
2 SNMP Interface
The Administrator must use this page to manage the SNMP (Simple Network
Management Protocol) settings.
Figure 7-10. ‘Admin | SNMP’ Page
Simple Network Management
– Use the drop-down list to set the Simple
Network Management operational setting as
Enabled
or
Disabled
.
The Read , Write , and Trap Community Strings can be any combination of
characters and a length of 0 to 20 characters:
• The factory default Read Community String is public .
• The factory default Write Community String is private .
•
The factory default Trap Community String is comtech .
SNMP Contact / SNMP Location / SNMP Name – Enter this identity information
in any alphanumeric combination with a length of 0 to 20 characters.
Enable Authentication Trap – Use the drop-down list to set Trap operation as
Enabled or Disabled .
The Administrator can assign up to two Trap IP addresses.
Trap Version – Use the drop-down list to set the Trap Version as SNMPv1 or
SNMPv2 .