Comtech EF Data DT-4500 Series, Инструкция по установке и эксплуатации

Страница: 138 / 206

DT-4500 Series C- and Ku-Band Down Converters MN/DT4500.IOM
Ethernet Interface Operation Revision 2
7–18
Mute
Use the drop-down list to set the Configuration Mute Mode as On or Off . Click
[Change] .
Carrier Mute Mode
Use the drop-down list to set the Carrier Mute Mode as On or Off . Click [Change] .
Cold Start Mute
Use the drop-down list to set the Cold Start Mute function as On or Off. Click
[Change] .
Fault Recovery
Use the drop-down list to set the Fault Recovery function as MANUAL or
AUTOMATIC . Click [Change] .
Channel Slope Adjustment
Enter a slope value ( 0 . 0 to 1 . 0 ) in 0.1 steps. Click [Change] .
Serial
Interface Type – Use the drop-down list to set the operating serial mode as
RS-485 or RS-232 .
Remote Address – Enter a valid remote control address from 0001 to 9999 .
Baud Rate
– Use the drop-down list to set the operating baud rate as
100
,
2400
,
4800
,
9600
,
19200
or
38400
baud.
Data bits-Parity-Stop Bits – Use the drop-down list to set the asynchronous
character format as:
• 8-N-1 (8 data bits, no parity, 1 stop bit)
• 7-O-2 (7 data bits, odd parity, 2 stop bits
•
7-E-2 (7 data bits, even parity, 2 stop bits).
Click [Change Serial Configuration] .