Comelit VEDO10, Техническое руководство

Страница: 52 / 60

52
5.5.1 Keypads
Vedo 10 x: from 1 to 2 / Vedo 34 x: from 1 to 8 / Vedo 68 x: from 1 to 8
Indices Parameters
Configurations necessary to
guarantee Grade 2 certification
1.1.1.1.x.2 Checked areas At least one selected area
1.1.1.1.x.4 Tamper areas At least one selected area
1.1.1.1.x.5 Technical areas At least one selected area
1.1.1.1.x.16 Buzzer on Active
1.1.1.1.x.17 Entrance Buzzer Active
1.1.1.1.x.18 Exit Buzzer Active
1.1.1.1.x.19 Alarm Buzzer Active
1.1.1.1.x.22 Pre-alert Buzzer Active
1.1.1.1.x.24 System status display time 0 (+30 seconds)
1.1.1.1.x.25 Tamper cycles Unlimited
1.1.1.1.x.26 Technical cycles Unlimited
1.1.1.1.x.27
Unlimited System status
display time
Deselected
1.1.1.1.x.28 Unlimited tamper cycles Selected
1.1.1.1.x.29 Unlimited technical cycles Selected
1.1.1.1.x.30 System device Not used
1.1.1.1.x.33 Quick activation Deselected
1.1.1.1.x.35 Area status Selected
1.1.1.1.x.37 Zones open Selected
1.1.1.1.x.41 Send Digital Com Selected
1.1.1.1.x.43 Buzzer ActDeact Selected
1.1.1.1.x.44 Buzzer Act.Failed Selected
5.5.2 App
x: from 1 to 8
Indices Parameters
Configurations necessary to
guarantee Grade 2 certification
1.1.1.5.x.2 Controllable areas At least one selected area
1.1.1.5.x.3 Tamper areas At least one selected area
1.1.1.5.x.4 Tamper cycles Unlimited
1.1.1.5.x.10 Send digital communication Selected
1.1.1.5.x.12 Unlimited tamper cycles Selected
1.1.1.5.x.23 Unlimited start-up time Deselected
5.5.3 Input/output expansions (8I8O)
Vedo 10 x: not available / Vedo 34 x: from 1 to 8 / Vedo 68 x: from 1 to 12
Indices Parameters
Configurations necessary to
guarantee Grade 2 certification
1.1.1.7.x.2 Tamper areas At least one selected area
1.1.1.7.x.3 Technical areas At least one selected area
1.1.1.7.x.4 Tamper cycles Unlimited
1.1.1.7.x.5 Technical cycles Unlimited
1.1.1.7.x.8 Unlimited tamper cycles Selected
1.1.1.7.x.9 Unlimited technical cycles Selected
1.1.1.7.x.12 Send Digital Com Selected
5.5.4 Power supply stations
Vedo 10 x: from 1 to 1 / Vedo 34 x: from 1 to 4 / Vedo 68 x: from 1 to 8
Indices Parameters
Configurations necessary to
guarantee Grade 2 certification
1.1.1.8.x.2 Tamper Areas At least one selected area
1.1.1.8.x.3 Technical Areas At least one selected area
1.1.1.8.x.4 Tamper cycles Unlimited
1.1.1.8.x.5 Technical cycles Unlimited
1.1.1.8.x.7 Unlimited tamper cycles Selected
1.1.1.8.x.8 Unlimited technical cycles Selected
1.1.1.8.x.11
Send digital
communications
Selected
1.1.1.8.x.13 Tamper enabled Selected
1.1.1.8.x.14 Network alarm delay Max 60 seconds
1.1.1.8.x.15 Battery alarm delay Max 5 minutes
This chapter provides indications on the configuration parameters
which, if varied, could lower the safety level of the system, and the
configurations necessary to guarantee I&HAS certification.
For further details on programming and configuration,
consult the programming technical manual (downloadable
from the website www.comelitgroup.com).
5.5 CONFIGURATIONS NECESSARY TO
GUARANTEE GRADE 2 CERTIFICATION
ACCORDING TO EN50131-1
Fast navigation
Indices Parameters
1.1. 1.1.x.16 Buzzer on
1. Consult the table with the indices of the parameters* and
find the index of the desired function, starting from the
current depth level
2. Type in the index as follows, pressing prog at "." and
pressing at the end of the sequence:
* the following pages show only the indices of the parameters
to be configured to obtain grade 2 certification according to
EN50131-1.
1 1 1 16
LEVEL 3
LEVEL 2