Colorjet AURAJET II Series, Инструкция по установке и устранению неисправностей

Страница: 75 / 80

Page | 74
AuraJet Series II
18. Error Handling
Error Name Error Code Error Description
#define STATUS_SVC_SX2 (STA0) USB Chip : USB chip can ’t run normally
after 0.5 second as it may possible that
the USB chip is damaged.
#define STATUS_SVC_FPGA0 (STA1) FPGA Chip 1 : The STATUS keeps on the
high level after Power ON. Thus, it may
possible that the FPGA chip is damaged.
#define STATUS_SVC_FPGA1 (STA2) FPGA Chip 2 : The CONFIG_Done or
STATUS keep on high level where as
CONFIG is on the low status.
#define STATUS_SVC_FPGA2 (STA3) FPGA Chip 3 : The STATUS keeps on high
whereas CONFIG is on the high status.
#define STATUS_SVC_FPGA3 (STA4) FPGA Chip 4 : When Config FPGA and
FPGA report an error and retry 10 times
to resolve it.
#define STATUS_SVC_UPDATE_FAIL (STA5) The UPDATE Main Board is Failed.
#define STATUS_SVC_BYHX_DATA (STA6) The Core Board is not processed by the
BYHX initialization.
#define STATUS_SVC_EEPROM_CHK (STA16) The BYHX Tool checks that the EEPROM
is not passed.
#define STATUS_SVC_SDRAM_CHECK (STA7) The SDRAM is not passed.
#define STATUS_SVC_FLASH (STA8) Flash: Not Reading FPGA from flash.
#define STATUS_SVC_SDRAM_NOMATCH (STA9) The SDRAM is not compatible and also
not support current settings.
#define
STATUS_SVC_READBOARDID_FAIL (STA10) Read Board ID Error : Failure to operate
the encrypted chip.
#define STATUS_SVC_ARM_MOTION (STA11) The ARM Motion system initial error.
#define
STATUS_SVC_HEADBOARD_INIT_FAIL (STA12) HEAD Board Initial Fail : Failure to
operate EPSON head board encrypted
chip.
#define STATUS_FTA_SX2RESET (STA0) The USB chip error where it abnormally
restarted.
#define
STATUS_FTA_INTERNAL_WRONGHEADER (STA1) The Wrong Data Header error occurs.
#define
STATUS_FTA_INTERNAL_WRONGHEADER
SIZE (STA2) The Wrong Data Header Size error
occurs.
#define
STATUS_FTA_INTERNAL_JOBSTARTHEAD
ER (STA3) This error occurs when Job header
doesn’t enclosed additional data.