Cold Jet 514635, Руководство пользователя

Страница: 49 / 105

Industrivej 62
DK-6740 Bramming
Denmark
Original
Revision: 2.0
IceTech R1000H
Procedures for Maintenance and Repair
Page:
4-16 of
32
Date: 24.08.18
Init: JM
Replace wear parts
To remove the end plate
[ 4 ] , loosen the 6 screws [ 5 ] using a 6mm Allen wrench. The side plates [ 6 ] are
removed by loosening the screws on the side [ 7 ] using a 4mm Allen wrench. Replace the worn parts and
reassemble the press piston.
It’s important that the screws on the piston are secured by using low/medium strength threadlocker.
Reinstall the pistons as described in the procedure for tool set replacement.
6
4
5
7
1