Cold Jet 514635, Руководство пользователя

Страница: 67 / 105

Industrivej 62
DK-6740 Bramming
Denmark
Original
Version: 1.0
IceTech R1000H
Alarm List
Page: 1 of 5
Date: 01.05.18
Init: JM
ALARM LIST
Use the alarm list and corresponding troubleshooting table for solving problems with the IceTech R1000H.
When errors appear comparing and indentify it in the table below. Use table for troubleshooting to fix the
error.
In general Cold Jet recommend that the cause of errors are investigated as soon as they appear and that the
machine is not being operating until the error is identified or fixed. Some alarms are critical and can damage
equipment if reset multiple times.
However if the alarm is identified to not pose a threat to damage the machine, the alarm can be reset and
operation can continue until spare parts ect. are available. If the error can’t be reset after remedy – Cold Jet
recommend shutting down the machine and leaving it without power for 5 minutes. If the error is still
present and no troubleshooting in the manual fix the error then please contact Cold Jet Technical support.
Alarm no.
Alarm text Troubleshooting no.
1 Hardware Error TwinSAFE
2
2 Emergency stop group 1
3 Emergency stop 1
4 Emergency stop door right front 1
5 Emergency stop door right rear 1
6 Emergency stop door left front 1
7 Emergency stop door left rear 1
8 Emergency stop door front 1
9 Emergency stop door rear 1
10 Emergency stop outlet conveyor 1
11 Quick stop 2
12 Bus Error 3
13 Error , Max action time Pneumatic cylinder Shutter 4
14 Sensor failure hopper 1 7
15 Timeout emptying hopper 1 6
16 Error , Circuit breaker Process unit 1, Shuttle servomotor 5
17 Error , Circuit breaker Process unit 1, Eject servomotor 5
18 Wrong tool Unit 1 8
19 Sensor failure hopper 2 7
20 Time Out emptying hopper 2 6
21 Error , Circuit breaker Process unit 2, Shuttle servomotor 5
22 Error , Circuit breaker Process unit 2, Eject servomotor 5
23 Wrong tool Unit 2 8