Cold Jet 514635, Руководство пользователя

Страница: 47 / 105

Industrivej 62
DK-6740 Bramming
Denmark
Original
Revision: 2.0
IceTech R1000H
Procedures for Maintenance and Repair
Page:
3-14 of
32
Date: 24.08.18
Init: JM
7.
Install the new Compression Piston by sliding it back into place over the cylinder rod.
8.
Install the four compression piston bolts with wedge lock washers and tighten to 12.5 ft.-lbs (17 N-m).
9.
Install the New rear chamber plate.
10.
Install the new eject piston & chamber side plates together as one unit.
11.
Install the new front chamber plate.
12.
Close the front block door.
13.
Install the taper pin by tapping downward with a rubber mallet until the pin protrudes out the bottom of
the chamber walls.
14.
Close all guard panel doors before machine operation.