Cold Jet 514635, Руководство пользователя

Страница: 34 / 105

Industrivej 62
DK-6740 Bramming
Denmark
Original
Revision: 2.0
IceTech R1000H
Procedures for Maintenance and Repair
Page: 1-1 of 32
Date: 24.08.18
Init: JM
PROCEDURES FOR MAINTENANCE AND REPAIR
This table includes all the procedures for maintenance and repair. It is based on 8 hours production pr.
Day and 20 production days pr. Month. This is equal to 1000 hours pr. 6 months and 2000 hours pr. 12
months.
After locating procedure numbers in the table for service interval, you have to find the procedure
numbers in the table below which will lead to detailed procedures on pages in the appendix.
Procedure
no. Procedure description Service interval
Hours.
1 Procedure for replacement of hydraulic oil filter and
pressure filter 2000
2 Procedure for Replacement of gaskets in Ø150
hydraulic cylinder 6000
3 Procedures for tool set replacement 2000
4 Procedures for replacement of wear plates on Press-
and eject pistons 2000
5 Procedure for replacement of Ø150 hydraulic cylinder 10000
6 Procedure for changing air filter 1000 then every 2000
7 Procedure for changing hydraulic pump Rexroth 10000
8 Procedure for changing hydraulic oil hydraulic station 2000
9 Procedure for hopper clean out and machine thaw up 24-48
10 Procedure for replacing diverter cylinder 2000
11 Procedure for replacing hammer on hopper 2000
Servomotor, gears and ball bearings estimated durability approx. 30000 hours.
Pneumatic air cylinders estimated durability approx. 15000 hours.