Cold Jet 514635, Руководство пользователя

Страница: 20 / 105

Industrivej 62
DK-6740 Bramming
Denmark
Original
IceTech R1000H
Operator Manual for Reformer
Version: 1.0
Page:
18 from
23
Date: 30.08.17
Init.: JM
STOP PRODUCTION
1. The machine is stopped by pressing the “Start / Stop” button.
NOTE:
This will activate the shutdown procedure.
2. Cut off the main electricity supply.
NOTE:
Do not shut off the main switch on the cabinet inside the machine before hoppers and conveyors are empty.
Maintenance Daily
(Before start-up)
1. Check the oil level in the sight glass container.
(After shut-down)
2. Check the hydraulic pipes and hoses for leaks.
REPAIR AND WARRANTY
Repair
The repair/replacement of the spare parts can be made either by a Cold Jet technician or by the owner’s qualified personnel.
When making repairs/replacements, use only original IceTech spare parts.
Terms of Warranty
In order to comply with the terms of the warranty, and for safety reasons, repairs other than those stated above require
relevant tools and equipment and therefore must always be made either by a Cold Jet technician or by the owner’s qualified
personnel who has been trained by Cold Jet in the repair and maintenance of IceTech dry ice blasting and dry ice production
machines and accessories. Beyond the necessary knowledge, the person concerned must have appropriate tools and
equipment, as well as the auxiliary materials required, at his disposal.
The liability of the manufacturer under the terms of the CE endorsement, as regards to safety, may be invalid:
• If repairs are made using non-IceTech spare parts.
• If repairs are made by unqualified personnel.
• If repairs are unsatisfactory due to lack of relevant tools and equipment.
In such cases, the liability of the manufacturer will be solely confined to any manufacturing faults/errors made prior to the
machine being delivered and before repairs/replacements have been made.