manualshive.com logo in svg

COBHAM 2201R, Справочное руководство, Страница: 76 / 295

Поделиться
Скачать
COBHAM 2201R Скачать руководство пользователя страница 76

2201R Mobile Tester  SCPI Reference Guide

Chapter 6 Status commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

76

:STATus:OPERation:MEASuring[:EVENt]?

Syntax

:STATus:OPERation:MEASuring[:EVENt]?

Parameters

There are no parameters.

Description

Reads out the current contents of the measuring operation event register.
Note: Event-type registers are read-only and self-destructive. They are cleared after any query.

Query

There is only a query form of this command available. The query returns a string, containing one integer. The value 
returned represents all measuring operation events that have occurred since the last query of this register. As with 
any event-type register, the single bits remain set even when the reason for the bits to be set is no longer valid. Please 
note that this is the main difference between event-type and condition-type registers. Condition-type registers 
reflect the current state of the 2201R. Consequently, the condition type registers are updated continuously.
Note: In case a certain event is trapped in a loop within a program, always query the event-type register.

Example

:STATus:OPERation:MEASuring:EVENt?
Value returned: "8".
This means that bit 3 (stands for AF measurement) has been set.

:STATus:OPERation:MEASuring:CONDition?

Syntax

:STATus:OPERation:MEASuring:CONDition?

Parameters

There are no parameters.

Description

This command reads out the current contents of the measuring operation condition register. This register reflects the 
current state of the 2201R in terms of measurements and is updated continuously.
Note: This register is nondestructive. This means that it keeps its contents after any query.

Query

There is only a query form of this command available. The query returns a string, containing one integer. The integer 
expresses all bits set in the 16 bit measuring operation condition register.
Note: Bits 4 to 15 (the MSB) of this register are not used. Therefore, the maximum value returned is "7".

Example

:STATus:OPERation:MEASuring:CONDition?
Value returned: "1".
This means that bit 0 has been set and that there is an RFTX measurement currently in progress. This bit is reset as 
soon as the RFTX measurements have been completed.

Содержание 2201R








































































































































































































































































































Отзывы:

Нет отзывов