manualshive.com logo in svg

COBHAM 2201R, Справочное руководство, Страница: 151 / 295

Поделиться
Скачать
COBHAM 2201R Скачать руководство пользователя страница 151

2201R Mobile Tester  SCPI Reference Guide

Chapter 8 Configuration commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

151

:CONFigure:EGPRs:BS:NCELl 

Syntax

:CONFigure:EGPRs:BS:NCELl <int1>,<int2>,<int3>,<int4>,<int5>,<int6>

Parameters

int1 to int6 are integers. 
The minimum value for each intx is 0, the maximum value is 1023. The default value for each intx is 0.

Description

This command is used to set the channel numbers for up to six neighboring cells. These channel numbers are 
broadcast in the system information message by the 2201R. The mobile under test has to perform a MS report on 
those frequency channels.
Notes:
All six integer values are optional. If the command is sent without any channel number specified, the default values 
(=0) are broadcast by the 2201R in the system information message.
Assume that there was a first command sent with six channel numbers specified. After that, a second command is 
sent with only two channel numbers specified. Now, the 2201R alters only the first two channel numbers and 
maintains all other settings (see example below for details).

Query

The query form of this command always returns the complete set of neighboring channel numbers currently in use. 
The string delivered back always contains six integers.

Example

:CONFigure:EGPRs:BS:NCELl 10,20,30,40,50,60
:CONF:EGPRs:BS:NCEL 70,80
:CONF:EGPRs:BS:NCEL?
Values returned in this example: "70,80,30,40,50,60".

Содержание 2201R








































































































































































































































































































Отзывы:

Нет отзывов