manualshive.com logo in svg

COBHAM 2201R, Справочное руководство, Страница: 64 / 295

Поделиться
Скачать
COBHAM 2201R Скачать руководство пользователя страница 64

2201R Mobile Tester  SCPI Reference Guide

Chapter 6 Status commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

64

:STATus:OPERation[:EVENt]?

Syntax

:STATus:OPERation[:EVENt]?

Parameters

There are no parameters.

Description

Reads out the current contents of the General Operation Event Register.
Note: Event-type registers are read-only and self-destructive. They are cleared after any query.

Query

There is only a query form of this command available. The query returns a string containing one integer.
The value returned represents all general operation events that have occurred since the last query of this register. As 
with any event-type register, the single bits remain set even when the reason for the bits to be set is no longer valid. 
Please note that this is the main difference between event-type and condition-type registers. Condition-type 
registers reflect the current state of the 2201R. Consequently, condition-type registers are updated continuously.
Note: In case a certain event is trapped in a loop within a program, always query the event-type register.

Example

:STATus:OPERation:EVENt?
Value returned: "32".
This means that bit 5 (the "waiting for a trigger" bit) has been set. This indicates that a "waiting for a trigger" event did 
occur. If you want to know whether the 2201R is still waiting for the trigger to occur, read out the related 
condition-type register (see command explained below).

:STATus:OPERation:CONDition?

Syntax

:STATus:OPERation:CONDition?

Parameters

There are no parameters.

Description

This command reads out the current contents of the General Operation Condition Register. This register reflects the 
current operational state of the 2201R and is updated continuously.
Note: This register is nondestructive. This means that it keeps its contents after any query.

Query

There is only a query form of this command available. The query returns a string containing one integer. The integer 
expresses all bits currently set in the 16-bit general operation condition register.
Note: Bit 15 (the MSB) of this register is not used. Therefore, the maximum value returned is "32767".

Example

:STATus:OPERation:CONDition?
Value returned: "512".
This means that bit 9 (the MEASure summary bit) has been set, indicating that some measurement is currently in 
progress. Bit 9 is reset as soon as the measurement has been completed.

Содержание 2201R








































































































































































































































































































Отзывы:

Нет отзывов