manualshive.com logo in svg

COBHAM 2201R, Справочное руководство, Страница: 202 / 295

Поделиться
Скачать
COBHAM 2201R Скачать руководство пользователя страница 202

2201R Mobile Tester  SCPI Reference Guide

Chapter 10 Measurement commands

47090/323

Copyright © 2016 Aeroflex Limited. All rights reserved.

202

:MEASure:GSM[:CONTinuous]:RFRX:FBER

Syntax

:MEASure:GSM[:CONTinuous]:RFRX:FBER

Parameters

There are no parameters.

Description

Starts a continuous measurement of the fast bit error ratio (C-type loop). To read out the latest measurement result, 
use the :FETCh:GSM:RFRX:FBER command.
Notes: 
- The number of samples to be used for testing can be set using the :CONF:GSM:BER:COUNt command.

Query

The query form of this command starts the measurement and returns a measurement result value as soon as the first 
measurement has been completed. The string delivered back contains one floating point real number, representing 
the bit error ratio.

Example

:MEAS:GSM:CONT:RFRX:FBER?
Measurement result string delivered back:
"1.5".

:MEASure:GSM[:CONTinuous]:RFRX:RTDelay

Syntax

:MEASure:GSM[:CONTinuous]:RFRX:RTDelay

Parameters

There are no parameters.

Description

Starts a continuous measurement of the round trip delay for data during bit error ratio measurements. To read out 
the latest measurement result, use the :FETCh:GSM:RFRX:RTD command.

Query

The query form of this command starts the measurement and returns a measurement result value as soon as the first 
measurement has been completed. The string delivered back contains one integer, representing the round trip delay.

Example

:MEAS:GSM:CONT:RFRX:RTDelay?
Measurement result string delivered back: 
"8".am: :MEAS:RFRX:RTDelay?
Measurement result string delivered back in this example: 
 "8".

Содержание 2201R








































































































































































































































































































Отзывы:

Нет отзывов